Properties
There are 19 parts with editable properties, all of which can be found in either the Powered Category or the Cosmetic Category.
⚙ DC Motor Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Rotational Direction | Determines whether the motor spins clockwise or counter-clockwise | CW/CCW | 
|
| Start On | Sets the part to start ON or OFF | On/Off | |
| Target RPM | Rotational velocity (RPM) will try to reach at maximum input | 0-500 | |
| Max Torque | Max torque (turning effect) can apply to reach its target RPM. Resize motor to increase | 0-20000 | |
| Advanced Properties | Description | Value | |
| Acceleration Time | How long it takes to accelerate from 0 to max velocity | 0-10 | |
| Max Break Force | Max force the motor will apply while breaking | 0-5000 | |
| Breaking Time | How long it takes to reach max break force when no input is applied | 0-10 |
⚙ Servo Motor Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Rotational Direction | Determines whether the motor spins clockwise or counterclockwise | CW/CCW | 
|
| Target RPM | Rotational velocity (RPM) will try to reach at maximum input | 0-500 | |
| Angle Limits | How far the motor can spin in each direction | 0-180, CW/CCW | |
| Start On | Sets the part to start ON or OFF | On/Off | |
| Max Torque | Max torque (turning effect) can apply to reach its target RPM. Resize motor to increase | 0-2000 | |
| Advanced Properties | Description | Value | |
| Acceleration Time | How long it takes to accelerate from 0 to max velocity | 0-10 | |
| Return to Origin | Will return to origin when it is not receiving input | On/Off | |
| Oscillate | Will move back and forth between min and max positions | On/Off | |
| Map to Angle | Input is mapped from min to max angles | On/Off |
⚙ Small Piston Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Target Velocity | Velocity that the piston will try to reach at maximum input | 0-100 | 
|
| Max Force | Max force that the piston will apply while trying to reach its target velocity | 0-3750 | |
| Start On | Sets the part to start ON or OFF | On/Off | |
| Advanced Properties | Description | Value | |
| Acceleration Time | How long it takes to accelerate from 0 to max velocity | 0-10 | |
| Oscillate | Will move back and forth between min and max positions | On/Off | |
| Return to Origin | Will return to origin when it's not receiving input | On/Off |
⚙ Small Telescoping Piston Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Target Velocity | Velocity that the piston will try to reach at maximum input | 0-100 | 
|
| Max Force | Max force that the piston will apply while trying to reach its target velocity | 0-5000 | |
| Start On | Sets the part to start ON or OFF | On/Off | |
| Advanced Properties | Description | Value | |
| Acceleration Time | How long it takes to accelerate from 0 to max velocity | 0-10 | |
| Oscillate | Will move back and forth between min and max positions | On/Off | |
| Return to Origin | Will return to origin when it's not receiving input | On/Off |
⚙ Large Piston Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Target Velocity | Velocity that the piston will try to reach at maximum input | 0-100 | 
|
| Max Force | Max force that the piston will apply while trying to reach its target velocity | 0-50000 | |
| Start On | Sets the part to start ON or OFF | On/Off | |
| Advanced Properties | Description | Value | |
| Acceleration Time | How long it takes to accelerate from 0 to max velocity | 0-10 | |
| Oscillate | Will move back and forth between min and max positions | On/Off | |
| Return to Origin | Will return to origin when it's not receiving input | On/Off |
⚙ Large Telescoping Piston Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Target Velocity | Velocity that the piston will try to reach at maximum input | 0-100 | 
|
| Max Force | Max force that the piston will apply while trying to reach its target velocity | 0-37500 | |
| Start On | Sets the part to start ON or OFF | On/Off | |
| Advanced Properties | Description | Value | |
| Acceleration Time | How long it takes to accelerate from 0 to max velocity | 0-10 | |
| Oscillate | Will move back and forth between min and max positions | On/Off | |
| Return to Origin | Will return to origin when it's not receiving input | On/Off |
⚙ Laser Pointer Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Start On | Sets the part to start ON or OFF | On/Off | 
|
⚙ Powered LED Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Start On | Sets the part to start ON or OFF | On/Off | 
|
| Pulse | Sets the LED to either pulse or provide constant light | On/Off | |
| Pulse Time | Adjusts the rate of pulsing on the Powered LED | 0-10 |
⚙ Vacuum Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Power | Power of the vacuum to suck in nearby objects | 0-10 | 
|
| Airflow Direction | Set the vacuum to normal or reverse airflow on start | CW/CCW | |
| Start On | Sets the part to start ON or OFF | On/Off |
⚙ Powered Pincer Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Max Force | Max force the claw exerts when opening and closing | 0-10000 | 
|
| Start Closed | Sets the claw to start in Open or Closed position | On/Off |
⚙ Powered Claw Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Max Force | Max force the claw exerts when opening and closing | 0-10000 | 
|
| Start Closed | Sets the claw to start in Open or Closed position | On/Off |
⚙ Text Screen Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Text | The text that will be displayed on the screen | Alphabetical and Numerical Characters | 
|
⚙ Microcontroller Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| New Script | Create a new script file and load it | .txt file | 
|
| API | Custom API instructions to assist with Python coding | ||
| Load Script | Load a script to use on this robot | .txt file | |
| Open Script Folder | Opens an external window to the robot's script folder | ||
| Port | A port where you assign a connected part | ||
| Auto-Assign | Auto-assign a port to all unassigned configurable parts | ||
| New Page | Create a new page of ports to assign controllable parts to |
⚙ Touch Sensor Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Max Force | Maximum force that the sensor can sense | 0-30 | 
|
⚙ Inertial Motion Sensor Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Account for Gravity | Will the sensor add in a factor for gravity so that stationary objects don't read as accelerating upwards against gravity | On/Off | 
|
⚙ Distance Sensor Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Visible Laser | Add a visible component to the Infared laser | On/Off | 
|
⚙ Turret Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Power | Power of the turret to shoot balls | 1-5 | 
|
| EMIT Rate | Time between emissions | 1-10 | |
| Start On | Sets the part to start ON or OFF | On/Off |
⚙ Bubble Machine Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| EMIT Rate | Time between emissions | 1-10 | 
|
| Particles Per Emission | How many bubbles are blown out | 1-5 | |
| Start On | Sets the part to start ON or OFF | On/Off |
⚙ Light Bulb Properties
| Basic Properties | Description | Value | Example |
|---|---|---|---|
| Start On | Sets the part to start ON or OFF | On/Off | 
|
| Pulse | Sets the light bulb to pulse on and off | On/Off | |
| Pulse Time | Sets frequency of light bulb pulse | 0-10 |