20 Fun Informational Facts About Replacement Upvc Window Handles

Replacement Upvc Window Handles

Most replacement upvc windows handles come with everything you require. However should you find that your old handle was fixed with pins or screws they'll need to be removed. Then, you need to remove the snap-in cover at the handle's base.

Next you will need to identify the type of window and lock your new handle is for - this is crucial!

Espag

Espag handles are a multipoint lock system that is fitted to casement windows such as uPVC and wooden double glazing. The handle is fitted with a 7mm square shaft that fits into an internal gearbox that is mounted on the uPVC window. When the handle is turned, it will activate a series of locks around the perimeter of the window. Espag handles are also referred to as shootbolt handles. They provide extra security compared to the conventional single point lock found on older window frames.

They are available in a variety of different styles, such as inline and cranked handles that can be used in left or right hand operation. You can even find various ergonomically designed handles that are made to improve both the feeling of the handle and the way it looks on your windows.

If you are looking to replace your existing uPVC window handle with an espag type handle, you'll be required to determine the dimensions of the spindle installed and measure it from the base of the handle in order to purchase the correct replacement. This measurement is known as step height and can assist you in finding the ideal uPVC handle for your home.

It is possible to remove any screws which protect the screws that hold the handle in place and if that's the case, you can use the screwdriver or pliers to take out the pins holding the handle. After this is done then you must take the handle apart by removing the screw or pins that secure the spindle, and then pulling it away from the window.

Once you have the handle removed, you'll be able to access the locking mechanism inside the frame of the window. You can then remove the wedge block for cockspur which is attached to the handle to allow the window to open. The new uPVC handles you ordered should be able to slide onto the cockspur block and then into the handle spindle, glass replacement Windows allowing the window glass replacement to reopen. The ideal solution is to replace the cockspur wedge block an entirely new one when you change your uPVC handle to ensure it is properly secured.

Cockspur

Cockspur handles are typically found on older uPVC and aluminium windows. The handle closes and turns into a wedge-shaped plastic catch. (Not to be confused with timber latches, which are also covered in this section.) These handles can be lockable or non-lockable. They are available in different nose sizes that can be adapted to the existing frame.

The handle locks with an thin spur (little triangle bit) pulling up against a plastic wedge that is fixed to the frame. These are usually one-way handles, but a locking deadlock can be added to give additional security.

The replacement cockspur handles are also simple to install. All you need is the correct backset and a new set (supplied). The backset is measured from the baseplate to the underside nose of the handle. Aluminium window frames are typically 9mm wide, whereas UPVC is 21mm wide. There are a myriad of variations however it is essential to measure the handle prior to purchasing the handle (see the video below for more details on how).

This kind of window handle can be changed by simply unscrewing the existing handle and taking off the spindle, or in certain instances, the entire handle assembly. The replacement handle can then be screwed into place with a pair of pozidriv screws. The pozidriv screw is available in a brass or zinc finish to match the hardware you already have. There is also an option for a self-locking pozidriv screw.

It is a simple to install replacement for the cockspur handle that is perfect for repairing or replacing old uPVC windows, they have a universal design which makes them suitable for a variety of profiles and backsets. Each handle comes with three packers of varying thickness, these are neatly placed on the side of the handle's nose and can be combined in a variety of ways to achieve backsets of 9, 13mm, 17mm and 21mm. They are available in right and left handed models and are available with nonlockable or lockable models, with a choice of nose heights.

Turn and Tilt

Tilt and turn windows are a premium European window style that has been in use for decades in Europe, but is only just starting to catch on stateside. They combine the benefits of three window styles into one - tilt, pivot and in-swing. They are great for older homes since they offer more airflow than standard windows.

When in the closed position tilt and turn windows close like windows that are fixed in normal fashion. However, by turning the handle 90° or 180@ (depending on the kind of tilt and turn window) the sash can be opened inward and the window will tilt in order to allow air circulation through the space at the top of the frame. This is a great solution to let air circulate without the need to open a large windows, which can be a safety danger if not properly secured when opening.

The sash can be fully opened by turning the handle 90@ or 180@. This allows complete air exchange which is especially beneficial in rooms with a lot of draft or houses where smoke and other odors can accumulate. This makes it easier to clean the glass replacement windows's exterior, as you can do it from inside your home. This is a task which often requires precarious steps.

Tilt and turn windows are also very secure. When locked in the closed position, they are very difficult to open from the outside and they feature double seals to prevent rainwater from getting into the home when they are in the tilted or in-swing position. This is a helpful feature for older homes, where intruders are more likely to target traditional windows that can be opened from the side hinges.

Spade

There are several different types of handles that are able to be fitted on double-glazed windows made of upvc. The two most popular types are Espag handles and Cockspur handles, then there's also tilt and turn handles, spade or blade handles, and monkey tail handles. The type of handle you pick will be based on your preferences and the type of windows you have.

To choose the right replacement upvc window handle, you need to know how your existing handle is attached to the frame. This is referred to as handing and is a crucial aspect to consider when buying online. Some handle variations are not suitable for all windows. Some cockspur handles, for instance, are angled whereas others are straight, and can turn left or right. You'll also need the size of the spindle, which is the distance between the base of the handle and the handle's head.

Another important part of choosing the correct handle is knowing whether your windows require a restrictor or not. These are usually used in high-rise flats or commercial buildings, however they aren't a requirement for most domestic homes. Also, consider step height which is the distance from the bottom of the screw plate to the nose of the handle.

The word spade comes from Old English spadu or spaedu and has been translated in several languages, including German spaten and Low German Spathen. In the 1920s, during the Harlem Renaissance in New York City spade started to be used as a sexist term for black people. Since the time spade has become a symbol of African American pride and heritage.

When replacing the handle of a Cadenza handle, it is essential that you get the right size. The handles are available in straight and angled versions that differ by only a few millimetres. The handle head is available in a variety of shapes that include a T or D shape. It is also possible to be left without handles.