RoboRepair Tutorials

RoboRepair Tutorial Menu

There are 12 RoboRepair Tutorials you can access via RoboCo’s Campaign Menu. These tutorials are meant to help players learn the basics of RoboCo as well as educate them on how to solve common RoboCo gotchas they may encounter while playing. Upon completing each tutorial, players are awarded a bit, which they can use to help progress in the campaign and access new challenges.

⚙ List of Different Tutorials

RoboRepair Tutorials - Part 1

Name	Intro	Focus	Description	Screenshot
Center of Mass		Translate Tool	The robot falls over before it reaches the goal. Balance the robot to fix it.
RPM		Max RPM	This robot can’t drive through the goal. Look for what’s wrong with the motors and try to fix it.
Torque		Resize Tool	The robot can't lift the weight. Make the robot's motor "muscles" more powerful.
Flip Motor Direction		Flip Direction	The robot spins in circles and doesn’t drive straight. Look for what’s wrong with the motors and try to fix it.
Motor Controls		Custom Controls / Controls Menu	The robot drives off the course. Look for what’s wrong with the controls and try to fix it.
Resizing Piston		Resize Tool	The robot can't reach the key to confirm it's not a robot. Help it extend its reach.

RoboRepair Tutorials - Part 2

Name	Intro	Focus	Description	Screenshot
Servo Motors		Properties Menu	The finger doesn't bend far enough to reach the piano key. Look for what's wrong with the motors and try to fix it.
Transmitters		Properties Menu	The door spins the wrong direction, so that the orange robot can't get out. Look for what's wrong with the controls and try to fix it.
Surface Joints		Joints Tool	The pistons are blocked from moving. Look for what's wrong with the joints and try to fix it.
Rotational Joints		Joints Tool	The signal is sent, but the key is blocked from rotating. Look for what's wrong with the joints and try to fix it.
Sliding Joints		Joints Tool	The signal is sent, but the claw is blocked from moving. Look for what's wrong with the joints and try to fix it.
		Ports	An error has appeared saying a port is not assigned. Check the microcontroller settings to fix it.