There are 12 RoboRepair Tutorials you can access via RoboCo’s Campaign Menu. These tutorials are meant to guide you through RoboCo’s interface and teach you how to use the many different tools, parts, and constructs at your disposal. Upon completing each tutorial, you are awarded a bit, which you can use to help progress forward in the campaign and access new challenges.
List of Different Tutorials
RoboRepair Tutorials - Part 1
| Name | Intro | Focus | Description | Screenshot |
|---|---|---|---|---|
| Center of Mass | 
|
Translate Tool | The robot falls over before it reaches the goal. Balance the robot to fix it! | 
|
| RPM | 
|
Max RPM | This robot can’t drive through the goal. Look for what’s wrong with the motors and try to fix it! | 
|
| Torque | 
|
Resize Tool | The robot can't lift the weight. Make the robot's motor "muscles" more powerful! | 
|
| Flip Motor Direction | 
|
Flip Direction | The robot spins in circles and doesn’t drive straight. Look for what’s wrong with the motors and try to fix it! | 
|
| Motor Controls | 
|
Custom Controls / Controls Menu | The robot drives off the course. Look for what’s wrong with the controls and try to fix it! | 
|
| Microcontroller | 
|
Ports | An error has appeared saying a port is not assigned. Check the microcontroller settings to fix it! | 
|
| Resizing Piston | 
|
Resize Tool | The robot can't reach the key to confirm it's not a robot. Help it extend its reach! | 
|
RoboRepair Tutorials - Part 2
| Name | Intro | Focus | Description | Screenshot |
|---|---|---|---|---|
| Servo Motors | 
|
Properties Menu | The finger doesn't bend far enough to reach the piano key. Look for what's wrong with the motors and try to fix it! | 
|
| Transmitters | 
|
Properties Menu | The door spins the wrong direction, so that the orange robot can't get out. Look for what's wrong with the controls and try to fix it! | 
|
| Surface Joints | 
|
Joints Tool | The pistons are blocked from moving. Look for what's wrong with the joints and try to fix it! | 
|
| Rotational Joints | 
|
Joints Tool | The signal is sent, but the key is blocked from rotating. Look for what's wrong with the joints and try to fix it! | 
|
| Sliding Joints | 
|
Joints Tool | The signal is sent, but the claw is blocked from moving. Look for what's wrong with the joints and try to fix it! | 
|