RoboRepair Tutorials

There are 12 RoboRepair Tutorials you can access via RoboCo’s Campaign Menu. These tutorials are meant to help players learn the basics of RoboCo as well as educate them on how to solve common RoboCo gotchas they may encounter while playing. Upon completing each tutorial, players are awarded a bit, which they can use to help progress in the campaign and access new challenges.

RoboRepair Tutorial Menu

⚙ List of Different Tutorials

RoboRepair Tutorials - Part 1

Name Intro Focus Description Screenshot
Center of Mass   Translate Tool The robot falls over before it reaches the goal. Balance the robot to fix it.  
RPM   Max RPM This robot can’t drive through the goal. Look for what’s wrong with the motors and try to fix it.  
Torque   Resize Tool The robot can't lift the weight. Make the robot's motor "muscles" more powerful.  
Flip Motor Direction   Flip Direction The robot spins in circles and doesn’t drive straight. Look for what’s wrong with the motors and try to fix it.  
Motor Controls   Custom Controls / Controls Menu The robot drives off the course. Look for what’s wrong with the controls and try to fix it.  
Resizing Piston   Resize Tool The robot can't reach the key to confirm it's not a robot. Help it extend its reach.  

RoboRepair Tutorials - Part 2

Name Intro Focus Description Screenshot
Servo Motors   Properties Menu The finger doesn't bend far enough to reach the piano key. Look for what's wrong with the motors and try to fix it.  
Transmitters   Properties Menu The door spins the wrong direction, so that the orange robot can't get out. Look for what's wrong with the controls and try to fix it.  
Surface Joints   Joints Tool The pistons are blocked from moving. Look for what's wrong with the joints and try to fix it.  
Rotational Joints   Joints Tool The signal is sent, but the key is blocked from rotating. Look for what's wrong with the joints and try to fix it.  
Sliding Joints   Joints Tool The signal is sent, but the claw is blocked from moving. Look for what's wrong with the joints and try to fix it.  
Microcontroller   Ports An error has appeared saying a port is not assigned. Check the microcontroller settings to fix it.